Setting the maximum resolution, Using the dell soundbar (optional) – Dell u2410 User Manual
Page 30
See
Solving Problems
for more information.
Setting the Maximum Resolution
1.
Right-click on the desktop and select Properties.
2.
Select the Settings tab.
3.
Set the screen resolution to 1920 x 1200.
4.
Click OK.
If you do not see 1920 x 1200 as an option, you may need to update your graphics driver. Depending on your computer, complete one of the following
procedures.
If you have a Dell desktop or portable computer:
¡
Go to support.dell.com, enter your service tag, and download the latest driver for your graphics card.
If you are using a non-Dell computer (portable or desktop):
¡
Go to the support site for your computer and download the latest graphic drivers.
¡
Go to your graphics card website and download the latest graphic drivers.
Using the Dell Soundbar (Optional)
or
In PIP mode, when the monitor does not sense the selected second signal input, one of the following messages will appear depending upon the selected input
as long as the OSD screen is closed.
1. VGA
2. DVI-D 1
3. DVI-D 2
4. HDMI
or
or
or
5. DisplayPort
6. Composite
7. Component
or
or
If either VGA, DVI-D, HDMI or DisplayPort input is selected and all VGA, DVI-D, HDMI and DisplayPort cables are not connected, a floating dialog box as shown below appears.
or
or
or
NOTE:
When there is no valid input signal and the monitor is switch off and on, any active PIP/PBP window will disappear. Please enter PIP/PBP submenu to bring back the PIP
window.