Playing a disc, disc changer – HONDA 2006 honda pilot User Manual

Page 133

Advertising
background image

To load or play CDs, the ignition
switch must be in the ACCESSORY
(I) or the ON(II) position.

You operate the CD player/CD
changer with the same controls used
for the radio. To select the CD
player/CD changer, press the CD
button. The number of the track
playing is shown in the display. With
the in-dash CD changer, the disc and
track numbers are displayed. The
system will continuously play a CD
until you change modes.

Insert a CD into the CD slot. The
drive will pull the CD in the rest of
the way to play it. When the system
reaches the end of the disc, it will
return to the beginning and play the
disc again.

You cannot load and play 3-inch
(8-cm) discs in this system.

If you turn the system off while a CD
is playing, either with the PWR/VOL
knob or by turning off the ignition,
the disc will stay in the drive. When
you turn the system back on, the CD
will begin playing where it left off.

To listen to satellite radio when a CD
is playing, press the AUX/XM or XM
button.

To play the radio when a CD is
playing, press the AM/FM button
(AM or FM button). Press the CD
button again to switch back to the
CD player.

To select a different disc, press the
appropriate preset button (1

6). On

models with navigation system,
touch the appropriate disc icon. If
you select an empty position in the
CD changer, the system will go into
the loading sequence.

On models with Satellite Radio

LX models

Playing a Disc, Disc Changer

To Play a CD

Fe
a

tu

re

s

131

Do not use discs with adhesive labels.
The label can curl up and cause the
disc to jam in the unit.

Advertising
This manual is related to the following products: