Lights – HONDA 2006 honda pilot User Manual
Page 254
Advertising
Open the tailgate.
Remove the two screws, then pull
the rear light assembly straight
back to remove it from the body.
Open the tailgate. Place a cloth on
the edge of the cover. Remove the
covers by carefully prying on the
edge with a small flat-tipped
screwdriver.
Remove the socket by turning it
one-quarter turn counterclockwise.
Remove the socket of the burned
out bulb by turning it one-quarter
turn counterclockwise, and pull it
straight out of its socket.
Install a new bulb into the socket,
and reinstall the socket into the
light assembly.
1.
1.
2.
3.
2.
4.
Lights
Replacing Rear Bulbs
Replacing a Back-up Light Bulb
252
Advertising
This manual is related to the following products: