Floor mats, cleaning seat belts – HONDA 2006 honda pilot User Manual

Page 256

Advertising
background image

If your seat belts get dirty, use a soft
brush with a mixture of mild soap
and warm water to clean them. Do
not use bleach, dye, or cleaning
solvents. Let the belts air-dry before
you use the vehicle.
Dirt build-up in the loops of the seat
belt anchors can cause the belts to
retract slowly. Wipe the insides of
the loops with a clean cloth
dampened in mild soap and warm
water or isopropyl alcohol.

The driver’s and right second row
floor mats that came with your
vehicle hook over the floor mat
anchors. This keeps the floor mats
from sliding forward and possibly
interfering with the pedals or
marking the front passenger’s
weight sensors ineffective.

If you remove a floor mat, make sure
to re-anchor it when you put it back
in your vehicle.

If you use non-Honda floor mats,
make sure they fit properly and that
they can be used with the floor mat
anchors. Do not put additional floor
mats on top of the anchored mats.

Floor Mats

Cleaning Seat Belts

Floor Mats, Cleaning Seat Belts

254

LOOP

Advertising
This manual is related to the following products: