Canon PowerShot G11 - Manual (Page 14)

14
Use the included charger to charge the battery.
The battery is not charged at time of purchase. Be sure to charge the battery
before use.
Remove the cover.
Insert the battery.
● Align the S marks on the battery and
charger, then insert the battery by sliding it
in
and down .
Charge the battery.
● For CB-2LZ: Flip out the plug and plug
the charger into a power outlet .
● For CB-2LZE: Plug the power cord into
the charger, then plug the other end into a
power outlet.
X The charge lamp lights red and charging
starts.
● The charge lamp will light green when
charging has finished. Charging takes
approx. 2 hours and 20 minutes.
Remove the battery.
● Unplug the battery charger from the power
outlet, then remove the battery by sliding it
in
and up .
Charging the Battery
CB-2LZ
CB-2LZE
To protect the battery and prolong its life, do not charge it for longer than
24 hours continuously.
CO
PY