Canon PowerShot G11 - Manual (Page 162)

162
If you use AC Adapter Kit ACK-DC50 (sold separately), you can use the
camera without worrying about how much charge is left in the battery.
Insert the plug into the coupler.
● Firmly insert the DC plug of the compact
power adapter cable into the DC Coupler
terminal.
Insert the coupler.
● Open the cover (p. 16) and insert the
coupler as shown until it locks into place
with a click.
Close the cover.
● Press and hold the DC Coupler cable
cover using the cable, then close the
memory card/battery cover.
Connect the power cord.
● Connect the power cord to the compact
power adapter, then plug the other end
into a power outlet.
● You can turn the camera on to use it.
● After you finish, turn off the camera and
unplug the power cord from the power
outlet.
Using Household Power
DC Coupler DR-50
DC Coupler Cable Cover
CO
PY