Changing the af frame mode, Frame selector) (pp, Co py – Canon PowerShot G11 User Manual

Page 88

Advertising
background image

88

You can change the AF (Auto Focus) frame mode to match the conditions
you want to shoot.

Choose [AF Frame].

Press the

n button, choose the 4

tab, and then choose the [AF Frame]
menu item. Press the

qr buttons to

choose an option.

Face AiAF

Detects people’s faces and sets the focus, exposure (evaluative metering
only) and white balance (

only).

When the camera is pointed at subjects, a white frame appears on the
face the camera judges to be the main subject, and gray frames (max. 2)
will appear on other faces. When the shutter button is pressed halfway, up
to 9 green frames will appear on faces on which the camera focuses.
However, if either Servo AF (p. 91) or Continuous AF (p. 152) is set to
[On] and no faces are detected, the AF frame will appear in the center.

Changing the AF Frame Mode

You can switch between AF frames by pressing the

button followed

by the

¤ button.

If a face is not detected or only gray frames (no white frame) appear, up
to 9 green frames will appear on the areas the camera focuses on when
the shutter button is pressed halfway.

Examples of faces that cannot be detected:

Subjects that are far away or extremely close.

Subjects that are dark or light.

Faces turned to the side or at a diagonal, or faces with a portion hidden.

The camera may mistakenly identify non-human subjects as a face.

If the camera cannot focus when you press the shutter button halfway,
the AF frame will not appear.

CO

PY

Advertising