Canon PowerShot G11 - Manual (Page 159)

159
In the 3 tab, you can change the sounds played for each camera operation
or set the start-up image that appears when the camera power is turned on.
Change Sounds
● Choose [Sound Options], then press the m
button.
● Press the op buttons or turn the  dial to
choose an option.
● Press the qr buttons to choose a setting.
Changing the Start-up Screen
● Choose [Start-up Image], then press the m
button.
● Press the qr buttons to choose a setting.
Setting a Recorded Image as the Start-up
Screen Image
When you press the 1 button and set the camera to Playback mode, you
can register sounds and images.
● Choose [Start-up Image], then press the m
button.
● Press the qr buttons to choose [3], then
press the m button.
Changing the Start-up Image or Sound
1, 2 Preset sounds.
3
You can register your sounds using the
supplied software (p. 160).
No start-up image.
1, 2 Preset images.
3
You can register your images. You can register
the start-up image using the supplied software.
CO
PY