GE dect 6.0 - Manual (Page 12)

Getting started
8
6. Plug the telephone line cord into the jack on the wall plate. Align the
holes on the telephone with the mounting studs of the wall plate
and slide the telephone base down until it locks securely. Tie the
excess cords neatly with a twist tie. Plug the power adapter into an
electrical outlet. Be sure to avoid using an electrical outlet that is
controlled by a wall switch.
7. Place the corded handset on the telephone
base.
8. To test the installation, pick up the corded
handset or press the button. If you hear
a dial tone, the installation is correct.
THIS END UP
FOR WALL USE
THIS END UP
FOR DESK USE