GE dect 6.0 - Manual (Page 47)

Phonebook
43
Using the telephone base
1. Press
.
2. Press / to select PHONEBOOK and
then press .
3. Press again to select ADD NEW.
4. Enter the name (max. 14 characters). Press the
key to the corresponding character to display the
correct letter. See the character table on page
44 for more information.
5. Press .
6. Enter the number (max. 20 digits). If you need a
pause between digits, press and hold the
until a P appears in the display. This will insert a
3-second pause in the dialing sequence.
7. Press to save the new entry.
-OR-
1. Enter the number (max. 20 digits). If you need a pause between
digits, press and hold the until a P appears in the display. This
will insert a 3-second pause in the dialing sequence.
2. Press .
3. Enter the name (max. 14 characters) and then press to
confirm. Press the key to the corresponding character to display
the correct letter. See the character table on page 44 for more
information.
4. Edit the number if necessary.
5. Press
to confirm.
NOTES:
1. The phonebook is shared by the telephone base and all system handsets. Changes made
to the phonebook on any one handset or the telephone base apply to all.
2. The directory can store up to 100 entries with up to 20 digits for each telephone number
and 14 characters for each name.
10:30
PM
11/20
MAIN MENU
>PHONEBOOK
10:30
PM
11/20
PHONEBOOK
>ADD NEW
10:30
PM
11/20
ENTER NAME
_
10:30
PM
11/20
ENTER NUMBER
_