GE dect 6.0 - Manual (Page 64)

Answering system
60
Access the answering system remotely
1. Dial your phone number from any touch-tone telephone.
2. Once your answering system takes your call and you hear your
outgoing announcement, press the # key. The answering system
will ask you to enter your security code.
3. Enter your security code using the numeric keypad on the touch-
tone telephone. The system will start playing messages after you
hear a confirmation tone.
NOTES:
1. If your answering system is off, you will not hear your outgoing announcement. The
system will answer your call after 10 rings and then ask you to enter your security code.
2. If you have entered an incorrect security code, the system will ask you to enter the code
again.
3. If you have forgotten the security code, you will need to reset the system (refer to
page 62). The security code will be restored to its default setting as 0000 after system
reset.
Remote access commands
Touch-
tone keys
Remote command
1 Replay the current or previous message.
2 Play/stop messages.
3 Skip to the next message.
4 Turn the answering system on or off.
7 Listen to the main menu.
0 Delete the current message.
A convenient wallet card, with instructions needed to operate your
answering system remotely, can be found on page 82.