Attach handle to vacuum, Attach vacuum hose and tools – Bissell 15D6e User Manual

Page 5

Advertising
background image

w w w . b i s s e l l . c o m

a

ssembly

The only tool you’ll need to assemble

your vacuum is a screwdriver.

Attach handle to vacuum

1. Locate the vacuum handle and remove

the screw packet taped to the handle.

2. Stand the vacuum upright and from the

rear of the unit, slide the base of the

handle firmly into the grooves at the top

of the vacuum body.

3. Ensure the handle fits firmly to the vacu-

um body. If there are any gaps, continue

to push firmly until the handle is secure.

4. Insert the provided screw into the exist-

ing hole, attaching the handle to the

body of the vacuum. Tighten securely

with a screwdriver.

Attach vacuum hose and tools

1. Slide the end of the hose into the hose wand

base. Snap the hose into the hose clip.

Note: The vacuum will not operate

effectively unless the hose wand is

firmly attached.

2. Place the crevice tool on the storage clip

on the left side of the tank (when viewing

vacuum from rear.)

3. Place the dusting brush on the storage

clip located on the lower cord wrap.

4. Wrap power cord around cord wraps.

5

2

1

4

3

4

2

Advertising