Notice, Warning, Aintenance and care – Bissell 15D6e User Manual

Page 9: Thermal protector, Cleaning the foam motor and hepa media filter

Advertising
background image

w w w . b i s s e l l . c o m

9

M

aintenance and care

1. Unplug the vacuum from electrical outlet.
2. The foam motor filter protects the motor

from dirt particles. It is located in the

slide out tray underneath the dirt con-

tainer. If the filter becomes dirty, pull out

the tray, lift out the foam filter pad and

clean it.

NOTE: The foam motor filter may

be hand washed in cold water

with mild detergent. Rinse well

and air dry thoroughly before

replacing.

3. The HEPA media filter* assists in the

filtration process to return clean air to

the room. It is located beneath the pre-

motor filter in the slide out tray housed

underneath the dirt

container. If the filter becomes dirty,

remove the tray, remove and replace

the HEPA media filter*.

NOTE: The HEPA media filter* is

white pleated filter. This filter

is NOT washable and must be

replaced when it becomes dirty

Thermal Protector

An internal thermal protector has

been designed into your vacuum

toprotect it from overheating. When

the thermal protector activates, the

vacuum motor will stop operating. If

this happens:
1.
Turn the vacuum OFF and unplug from

electrical outlet.

2. Empty the dirt container, check filters

and air passages for dirt accumulation.

3. The thermal protector automatically

resets after approximately one hour. If

the thermal protector does not reset, call

BISSELL Consumer Services.

Cleaning the foam motor and HEPA media filter*

WARNING:

Do not operate cleaner with

damp or wet filters or without

all filters in place.

2

Foam-motor

Filter

Filter (under

foam motor

filter)

NOTICE:

This product is intended for household

use only and not for commercial or

industrial use. Vacuuming of dust

from products like plaster, concrete

or ashes will damage the motor and

void the warranty.

* The filter media, not the vacuum as a whole,

complies with the IEST-RP-CC001.5 HEPA Standard.

Advertising