Drucker Diagnostics Model 755 Centrifuge - Manual (Page 20)

20
Replacement Parts: 755– 12-Place, 755V– 12-Place
Part No. Description
7728052 Foot, rubber
7751068 Switch, lid safety
7786024 Rotor, twelve-place horizontal
7786042 Rotor, twenty-place fixed-angle
7786044 Rotor, six-place fixed angle
7735016 Motor, 1/2 H.P., Brushless
7717039 Brushless motor control PC board
7751043 Circuit Breaker
7760002 Power cord
7714101 Pawl, latch, lid
7714103 Knob, latch, lid
7712263 Lid
7713029 Air inlet cover, lid
7724071 Hinge, friction
7732018 Lid gasket
7732019 Rotor chamber gasket
7713027 Exhaust Air Deflector
7713032 Tube holder, black, for 125mm tubes
7713031 Tube holder, red, for 100mm tubes
7713033 Tube holder, green for 75mm tubes
Contact your
authorized dealer or
The Drucker Co.
for information on
ordering parts or
accessories.
Available Accessories:
1525 Tube cushion
For 100mm tubes in
the 125 mm tube
holder, 75mm tubes
In the 100mm tube
Holder and 50mm
and smaller tubes
in the 75mm tube
holder. p/n 1525
Non-aerosol
shield caps
p/n 7713011
Pediatric/
Microtube
Adapter
p/n
7713065 13 x 75mm
insert, polypro
p/n 7713064
13 x 100 mm
insert, tall
polypro
p/n 7713066
75mm
Tube Holder
For 16mm x
75mm tubes
and
16mm x
50mm tubes
(w/ p/n 1525)
p/n 7713033 100mm
Tube Holder
For 16mm x
100mm tubes
and
16mm x
75mm tubes
(w/ p/n 1525)
p/n 7713031 125mm
Tube Holder
For 16mm x
125mm tubes
and
16mm x
100mm tubes
(w/ p/n 1525)
p/n 7713032 9150 Tube cushion
6mm (0.25”)
additional spacer
for odd-length
tubes p/n 9150
20-Place Fixed-Angle Rotor
For use with the 75mm, 100mm and 125mm
tube holders
p/n 7786042