Edge Lighting Box Pro Aim MR16 - Manual (Page 4)

4
Pro-Aim Positioning and Locking the Box
N
O
1
2MM ALLEN
DRIVER
2: Use the 2mm Allen driver on the bottom of the Box arm to
tilt the head up or down.
2
P
BOTTOM M4
SET SCREW
2
Install the Fixture to Fast Jack Canopy (FJP-2SQ-_, FJP-4SQ-_,
FJP-4RD-_)
L
1: Loosen the top M4 set screw on the Box arm with the 2MM
Allen driver.
2: Remove and discard the Box housing connector.
FAST JACK CANOPY
CONNECTOR
FAST JACK FIXTURE
CONNECTOR
M
3
4
3: Use fingers to tighten the Fast Jack fixture connector into
the Fast Jack canopy connector.
4: Tighten the top M4 set screw with the 2mm Allen driver to
secure the fixture in place.
2MM ALLEN
DRIVER
TOP M4 SET
SCREW
TOP M4 SET
SCREW
2MM ALLEN
DRIVER
BOX HOUSING
CONNECTOR
(DISCARD)
1
2MM ALLEN DRIVER
SHADE
3
3
front of the shade to rotate the lens to the desired position.
Tighten the M4 set screw to lock the lens in position. : Place the 2mm Allen driver into the M4 set screw on the
2MM ALLEN DRIVER
1
by tightening the bottom M4 set screw with the 2mm Allen
driver. : Rotate the fixture to the desired position and lock it in place