Install cirrus float to monorail – Edge Lighting Cirrus Float for Monorail User Manual

Page 5

Advertising
background image

9: Push the tab on the adjustable connector and feed the
aircraft cable through the tab.

10: Pull the aircraft cable coming out of the side of the
adjustable connector.

11: When desired height is achieved release the tab to lock the
aircraft cable in place.

12: Use fingers to tighten the Fast Jack fixture connector into
the Fast Jack canopy.

13: If necessary, repeat steps 9 through 11. Trim off excess
aircraft cable coming out of the adjustable connector side
hole for a neat finished look.

8: Insert the adjustable connector completely into the threaded
post and tighten the M3 set screw with the 1.5mm Allen
wrench.

Install Cirrus Float to Monorail

FAST JACK
HOUSING

1

FAST JACK

HOUSING

CONNECTOR

2

ADJUSTABLE
CONNECTOR

T

NOTE: To install the aircraft cable side of the fixture onto the
ceiling, follow steps 3 through 11 and 13 in the “Install Cirrus
Float to Single or Multi Port Fast Jack Canopies” starting on
page 4.

1: Place the Fast Jack housing onto the Monorail and use
fingers to tighten the Fast Jack housing connector to the Fast
Jack housing. Make sure the Fast Jack housing connector is
not cross-threaded.

2: Place the Fast Jack housing connector of the adjustable
connector onto the Monorail and finger-tighten the
adjustable connector to the Fast Jack housing. Make sure
the Fast Jack housing connector is not cross-threaded.

FAST JACK
HOUSING

3: Push the tab on the adjustable connector and feed the
aircraft cable through the tab.

4: Pull the aircraft cable coming out of the side of the
adjustable connector. Release the tab to lock the aircraft
cable in place.

5: Use fingers to tighten the Fast Jack fixture connector into
the Fast Jack housing connector making sure that it is not
cross-threaded.

6: Readjust the aircraft cable to the desired height using steps
3 and 4. When desired height is achieved, release the tab
to lock the aircraft cable in place.

7: Trim off excess aircraft cable coming out of the adjustable
connector side hole for a neat finished look.

5

1.5MM

ALLEN

WRENCH

ADJUSTABLE
CONNECTOR

R

8

8

M3 SET SCREW

CEILING

TAB

SIDE
HOLE

AIRCRAFT
CABLE

12

CANOPY

FAST
JACK

CONNECTOR

S

CEILING

9

10

FAST JACK
PORT

FAST JACK
HOUSING

5

U

3

TAB

SIDE HOLE

AIRCRAFT
CABLE

4

FAST JACK
HOUSING

FAST JACK

FIXTURE

CONNECTOR

Advertising
This manual is related to the following products: