Edge Lighting 20" Fast Jack Canopies User Manual
Page 2
Advertising
2
E
MOUNTING PLATE
7: Secure the mounting plate to the anchors with the provided
#8 screws and washers.
F
8: Insert one end of the safety cable into the safety bracket of
mounting plate and the other end into the canopy safety
bracket.
WASHER
#8 SCREW
7
7
7
8
SAFETY
CABLE
SAFETY BRACKET
CANOPY
MOUNTING
PLATE
G
11
10
9: Make sure that the mounting plate is grounded in
accordance with local electrical codes.
10: Connect the white fixture wire to the neutral power wire
with a wire nut.
11: Connect the black fixture wire to the hot power wire with a
wire nut.
Advertising
This manual is related to the following products: