Edge Lighting 20" Fast Jack Canopies User Manual
Page 3
Advertising
3
H
12: Place all wires and wire nut connections inside the canopy.
13: Place the canopy onto the mounting plate and tighten the
six #8-32 screws.
#8-32 SCREW
12
MOUNTING PLATE
CANOPY
13
I
14:
one Fast Jack canopy port.
Use fingers to tighten each Fast Jack fixture connector into
FAST JACK
FIXTURE
CONNECTOR
14
FAST JACK
CANOPY
PORT
CAUTION: Risk of Fire:
MAX load of each Fast Jack canopy
connector is 50 watt.
Advertising
This manual is related to the following products: