Edge Lighting Twiggy Hinged, Direct 1" Lens - Manual (Page 4)

INSULATION
BRAIDED
WIRE
INNER
INSULATION
BARE WIRE 1/8"
COAXIAL CABLE
1/4"
10: Unscrew the coaxial connector covers and remove from the
connector assembly.
8: Using the 18 AWG hole of the wire strippers, remove
braided wire leaving 1/4" from the outer plastic insulation.
9: Using the 20 AWG hole of the wire strippers, remove 1/8"
of inner plastic insulation from the end of the coaxial cable.
11: Using the provided 1.5mm Allen Wrench, remove the M3
set screw from the coaxial connector assembly.
12: Using the provided 2mm Allen wrench to loosen (do not
remove) the M4 set screw.
13: Slide the connector cover over the coaxial cable.
14: Place the ferrule over the braided wire of the coaxial cable.
WIRE STRIPPERS
COAXIAL
CABLE
1.5MM ALLEN WRENCH
CONNECTOR
ASSEMBLY
COAXIAL
CONNECTOR
COVER
8
9
10
2MM ALLEN
WRENCH
M4 SET
SCREW
M3 SET
SCREW
11
12
COAXIAL
CONNECTOR
COVER
COAXIAL
CONNECTOR
COVER
BRAIDED
WIRE
FERRULE
13
14
3
INSULATION
BRAIDED
WIRE
COAXIAL CABLE
1"
6: Pull the coaxial cable through center hole of junction box
cover.
7: Using the 16 AWG hole of a pair of wire strippers, remove 1"
of outer plastic insulation from the coaxial cable.
6
7
JUNCTION BOX
COVER
CHANNEL
COAXIAL
CABLE
WIRE STRIPPERS
K
L
M
N
O
P