And on the device – BMW 650i xDrive Convertible 2012 User Manual
Page 197
▷
The mobile phone is ready for operation.
▷
Bluetooth is activated in the vehicle and on
the mobile phone.
▷
Bluetooth presettings may need to be made
on the mobile phone, e.g., for a connection
without confirmation or visibility, refer to the
mobile phone operating instructions.
▷
Deactivate Bluetooth audio if necessary.
▷
A number with at least four and a maximum
of 16 digits was defined as the Bluetooth
passkey. It is only required once for pairing.
▷
The ignition is switched on.
Activating/deactivating Bluetooth
Bluetooth is not permitted everywhere. Comply
with all safety guidelines and regulations.
1.
"Telephone"
2.
Open "Options".
3.
"Bluetooth®"
Additional functions
General information
Activate the functions before pairing to be able
to use them in the vehicle. Information on suit‐
able mobile phones, refer to page
, that sup‐
port these functions.
Additional telephone
A mobile phone can be used as an additional
telephone.
The additional telephone can be used to accept
incoming calls, refer to page
. While a call is
active on the additional telephone, incoming
calls are displayed on the Control Display.
Audio source
A mobile phone can be used as an audio source.
Activating/deactivating the additional
functions
1.
"Telephone"
2.
"Bluetooth® (phone)"
3.
Open "Options".
4.
Select the desired additional function.
▷
"Additional telephone"
▷
"Office"
▷
"Bluetooth® audio"
Pairing and connecting a device
Pairing a device
To avoid becoming distracted and posing
an unnecessary hazard both to your own vehi‐
cle's occupants and to other road users, only
pair the device while the vehicle is stationary.◀
1.
"Telephone"
2.
"Bluetooth® (phone)"
3.
"Add new phone"
The Bluetooth name of the vehicle is dis‐
played.
4.
To perform additional steps on the mobile
phone, refer to the mobile phone operating
instructions: for instance, search for or con‐
nect the Bluetooth device or a new device.
The Bluetooth name of the vehicle appears
on the mobile phone display.
5.
Select the Bluetooth name of the vehicle on
the mobile phone display.
Prompt via iDrive or the mobile phone to en‐
ter the same Bluetooth passkey.
6.
Enter the passkey and confirm.
7.
Select the functions for which the mobile
phone is to be used.
8.
"OK"
If the pairing was successful, the mobile phone
appears at the top of the list of mobile phones.
Seite 197
197
Online Edition for Part no. 01 40 2 606 521 - 03 11 490