Service requirements, Service display – BMW 650i xDrive Convertible 2012 User Manual
Page 81
1.
"Settings"
2.
"Control display"
3.
"Brightness"
4.
Turn the controller until the desired bright‐
ness is set.
5.
Press the controller.
The setting is stored for the remote control cur‐
rently in use.
Depending on the light conditions, the bright‐
ness control may not be clearly visible.
Service requirements
Display
The driving distance or the time
to the next service is displayed
briefly after the ignition is
switched on.
The current service require‐
ments can be read out from the remote control
by the service specialist.
Data regarding the maintenance status or legally
mandated inspections of the vehicle are auto‐
matically transmitted to your service center be‐
fore a service due date, Automatic Service Re‐
quest, refer to page
Detailed information on service
requirements
More information on the scope of service re‐
quired can be displayed on the Control Display.
1.
"Vehicle Info"
2.
"Vehicle status"
3.
"Service required"
Required maintenance procedures and le‐
gally mandated inspections are displayed.
4.
Select an entry to call up detailed informa‐
tion.
Symbols
Symbols
Description
No service is currently required.
The deadline for service or a le‐
gally mandated inspection is
approaching. Please make a
service appointment.
The service deadline has al‐
ready passed.
Entering appointment dates
Enter the dates for the required inspections.
Ensure that the vehicle date and time are set
correctly.
1.
"Vehicle Info"
2.
"Vehicle status"
3.
"Service required"
4.
"§ Vehicle inspection"
5.
"Date:"
6.
Create the settings.
7.
Confirm.
The entered date is stored.
Automatic Service Request*
Data regarding the maintenance status or legally
mandated inspections of the vehicle are auto‐
matically transmitted to your service center be‐
fore a service due date.
You can check when your service center was
notified.
1.
"Vehicle Info"
2.
"Vehicle status"
Seite 81
81
Online Edition for Part no. 01 40 2 606 521 - 03 11 490