Active blind spot detection, Last setting, on/off, Safety – BMW 650i xDrive Convertible 2012 User Manual

Page 98

Advertising
background image

Malfunctions

Steering wheel vibration

Frequent activation of the steering wheel vibra‐
tion causes the system to overheat.
This causes the lane departure warning to be‐
come deactivated.
Let the system cool and reactivate it by pressing
the button.

Camera

The camera is located on the front of the interior
rearview mirror.
Keep the area in front of the interior rearview
mirror clear.

Active Blind Spot Detection*

The concept

Two radar sensors below the rear bumper mon‐
itor the area behind and next to the vehicle at
speeds above approx. 30 mph/50 km/h.
The system indicates whether there are vehicles
in the blind spot, arrow 1, or approaching from
behind on the adjacent lane, arrow 2.

The lamp in the exterior mirror housing lights up
dimly.

Before you change lanes after setting the turn
signal, the system issues a warning in the situa‐
tions described above.
The lamp in the housing of the exterior mirror
flashes and the steering wheel vibrates.

Switching on/off

Press the button.

On: the LED lights up.

Off: the LED goes out.

The system can issue warnings at speeds above
approx. 30 mph/50 km/h.
The state is stored for the remote control cur‐
rently in use.

Display

Information stage

The dimmed lamp in the mirror housing indi‐
cates when there are vehicles in the blind spot
or approaching from behind.

Seite 98

98

Online Edition for Part no. 01 40 2 606 521 - 03 11 490

Safety

Advertising
This manual is related to the following products: