BMW 650i xDrive Convertible 2012 User Manual
Page 51
Installation
1.
Remove wind deflector from the protective
jacket and unfold it.
2.
Press the upper and lower parts together
until the latch engages.
3.
Push out the right retaining pin until the latch
engages and flip out the two rear retaining
pins.
4.
Install the wind deflector on the vehicle with
the right retaining pin and the two rear ones
in the corresponding openings.
5.
Push the left retaining pin into the provided
opening until it latches.
6.
Flip up the top half of the wind deflector.
Do not tilt the front seat backrest too far
back
Do not tilt the front seat backrest too far back
with the wind deflector installed if the seat is to
be moved all the way back. Otherwise, the wind
deflector will be damaged.◀
Removing
Proceed in reverse sequence.
Seite 51
51
Online Edition for Part no. 01 40 2 606 521 - 03 11 490