Roller sunblinds, Roller sun blind* for rear window 46, Opening and closing – BMW ActiveHybrid 750Li 2011 User Manual

Page 46

Advertising
background image

Even with the pinch protection system, check
that the window's closing path is clear; other‐
wise, the closing action may not stop in certain
situations, e.g., if thin objects are present.◀

Window accessories
Do not install any accessories in the range

of movement of the windows; otherwise, the
pinch protection system will be impaired.◀

Closing without the pinch protection

system

For example, if there is an external danger or if
ice on the windows prevents a window from
closing normally, proceed as follows:

1.

Pull the switch past the resistance point and
hold it there.
Pinch protection is limited and the window
reopens slightly if the closing force exceeds
a certain value.

2.

Pull the switch past the resistance point
again within approx. 4 seconds and hold it
there.
The window closes without pinch protec‐
tion.

Safety switch

The following functions can be locked simulta‐
neously, using the switch:

Opening and closing of the rear windows
using the switches in the rear.

Operation of the roller sunblinds* using the
switches in the rear.

Adjustment of the power rear seats*.

Adjustment of the power head restraints* in
the rear.

Switching on and off

Press the button.
The LED lights up if the safety function

is switched on.

Safety switch for rear operation
Press the safety switch when transporting

children in the rear; otherwise, injury may result
if the windows are closed without supervision.◀

To deactivate the function, the vehicle must be
in at least the radio ready state.

Roller sunblinds*

General information

The safety switch in the driver's door can be
used to prevent children, for example, from op‐
erating the roller blinds using the switches in the
rear.
Press the safety switch in the driver's door. The
LED lights up if the safety function is switched
on.
If you are no longer able to move the roller blinds
after having activated them consecutively a
number of times, the system is blocked for a
limited time to prevent overheating. Let the sys‐
tem cool.
The roller sunblinds cannot be moved at low in‐
terior temperatures.

Driver's door controls

Roller blind for rear window

Press the button.

Seite 46

46

Online Edition for Part no. 01 41 2 603 958 - 03 10 500

Opening and closing

Advertising
This manual is related to the following products: