BMW ActiveHybrid 750Li 2011 - Manual (Page 58)

Rear
Two different seat positions can be stored and
retrieved.
Storing
1. Switch on the ignition.
2. Set the desired position.
3. Press the button on the door. The
LED in the button lights up.
4. Press the desired button 1 or 2. The LED
goes out.
If the M button is pressed accidentally:
Press the button on the door again.
The LED goes out.
Calling up settings
Do not retrieve the memory while driving
Do not retrieve the memory setting while
driving, as an unexpected movement of the seat
or steering wheel could result in an accident.◀
Comfort function
1. Open the driver's door.
2. Switch off the ignition.
3. Briefly press the desired button 1 or 2.
The corresponding seat position is performed
automatically.
The procedure stops when a switch for adjust‐
ing the seat or one of the buttons is pressed.
Safety mode
1. Close the driver's door or switch on the ig‐
nition.
2. Press and hold the desired button 1 or 2 until
the adjustment procedure is completed.
Calling up of a seat position
deactivated
After a brief period, the calling up of stored seat
positions is deactivated to save battery power.
To reactivate calling up of a seat position:
▷ Open or close the door or trunk lid.
▷ Press a button on the remote control.
▷ Press the Start/Stop button.
Calling up with the remote control
The driver's seat, exterior mirror, and steering
wheel position selected last is stored for the
currently used remote control.
Pinch hazard when moving back the seat
If this function is used, first make sure that
the footwell behind the driver's seat is empty.
Otherwise, people can be injured or objects
damaged when the seat is moved back.◀
The adjustment procedure is interrupted:
▷ When a seat position switch is pressed.
▷ When a memory button is touched.
1. "Settings"
2. "Door locks"
3. "Last seat position auto."
Seite 58
58
Online Edition for Part no. 01 41 2 603 958 - 03 10 500
Adjusting