Storing a station, Ra di o – BMW 760Li Sedan 2008 User Manual
Page 160
Ra
di
o
158
Using the voice command system:
Updating selection of stations in
receiving range
In the course of longer trips, when you travel
outside the transmission range of the originally
selected stations, you can update the selection
of stations in receiving range.
1.
Select "AM" and press the controller.
2.
Select "MANUAL" and press the controller.
3.
Select "AUTOSTORE" and press the con-
troller.
The selection of stations in receiving range is
updated and the frequencies or names of the
stations are displayed.
Station scan
You can tune in to stations that are received in
addition to those on the display.
The frequency of the station is displayed in the
bottom status line and also on the Control Dis-
play.
Using buttons in center console
Press and hold the
button for the corre-
sponding direction.
The system switches to the next station.
Using iDrive
1.
Select "FM" or "AM" and press the control-
ler.
2.
Select " MANUAL" and press the controller.
3.
Select the desired direction and
press the controller.
The system switches to the next station. The
frequency is shown on the Control Display.
Storing a station
The station you are currently listening to can be
stored.
You can also manually store stations in the
"Autostore list" if this selection has been made
before storing.
iDrive, for principle details, refer to page
.
1.
Press the
button to open the start
menu.
2.
Move the controller toward "Entertain-
ment".
3.
Select "FM" or "AM" and press the control-
ler.
4.
Choose the selection criterion and press
the controller.
5.
Select "MANUAL" and press the controller.
6.
Select "STORE" and press the controller.
1.
{
Radio
}
.
2.
{
Frequency 88...107 (Point 1...9)
}
.
Online Edition for Part no. 01 41 0 013 316 - © 02/07 BMW AG