Vehicle health report, Door keypad code, Rear view camera – FORD 2013 F-550 v.3 User Manual

Page 524: Enable valet mode, Settings, Myford touch® (if equipped) 523

Advertising
background image

Vehicle Health Report

Turn Automatic Reminders on and off and set the mileage interval at
which you would like to receive the reports. Press ? for more information
on these selections.

When done making your selections, press Run Vehicle Health Report
Now
if you want your report.

Door Keypad Code

To change the keypad code for your keyless entry keypad system:
1. Press the Settings icon > Vehicle > Door Keypad Code.
2. Enter your current factory code, then, when prompted, enter your

new code.

Rear View Camera

This menu allows you to access settings for your rear view camera.

Press the Settings icon > Vehicle > Rear View Camera, then select
from the following settings:

• Rear Camera Delay

• Visual Park Aid Alert

• Guidelines.
Enable Valet Mode

Note: If the system locks, and you need to reset the PIN, enter 3681 and
the system unlocks.

Valet mode allows you to lock the system. No information is accessible
until the system is unlocked with the correct PIN.
1. Press the Settings icon > Vehicle > Enable Valet Mode.
2. When prompted, enter a four-digit PIN.

After you press Continue, the system locks until you enter the PIN again.

Settings

Access and adjust system settings, voice features, as well as phone,
navigation and wireless settings.

MyFord Touch® (If Equipped)

523

2013 F-250/350/450/550 (f23)
Owners Guide gf, 3rd Printing, December 2012
USA
(fus)

Advertising
This manual is related to the following products: