324 maintenance – FORD 2013 F-550 v.3 User Manual

Page 325

Advertising
background image

3. Clean the area around the air
tube to air cover connection to
prevent debris from entering the
system and then loosen the bolt on
the air tube clamp so the clamp is
no longer snug to the air tube. It is
not necessary to completely remove
the clamp.

4. Pull the air tube off from the air
cleaner housing.

5. Release the three clamps that secure
the cover to the air filter housing. Push
the air filter cover toward the center of
the vehicle and up slightly to release it.

6. Remove the air filter element
from the air filter housing.

7. Install a new air filter element.

8. Replace the air filter housing
cover and secure the clamps.
Be careful not to crimp the filter
element edges between the air filter
housing and cover and ensure that
the tabs on the edge are properly
aligned into the slots.

9. Slip the air tube onto the air
filter housing and tighten the
air-tube clamp bolt snugly,
but do not overtighten it.

324

Maintenance

2013 F-250/350/450/550 (f23)
Owners Guide gf, 3rd Printing, December 2012
USA
(fus)

Advertising
This manual is related to the following products: