Tether strap attachment, Child safety 33 – FORD 2013 F-550 v.3 User Manual

Page 34

Advertising
background image

Tether Strap Attachment

1. Route the child safety seat tether strap over the back of the seat.

For vehicles with adjustable head restraints, route the tether strap under
the head restraint and between the head restraint posts, otherwise route
the tether strap over the top of the seat back. If the top of the safety
seat hits the head restraint, raise the head restraint to let the child seat
fit further rearward.

2. Locate the correct anchor for the selected seating position.

3. You may need to pull the seat back forward to access the tether
anchors. Make sure the seat is locked in the upright position before
installing the child seat.

4. Remove the tether cover.

5. Clip the tether strap to the anchor as shown.

• Front seats (Regular Cab)/Rear

seats (Crew Cab)

If the tether strap is clipped incorrectly, the child safety seat may not be
retained properly in the event of a crash.

6. Tighten the child safety seat tether strap according to the
manufacturer’s instructions.

Child Safety

33

2013 F-250/350/450/550 (f23)
Owners Guide gf, 3rd Printing, December 2012
USA
(fus)

Advertising
This manual is related to the following products: