FORD 2013 F-550 v.3 - Manual (Page 384)

Note: The following steps apply to all vehicles:
18. Remove the jack and fully
tighten the lug nuts in the order
shown. See Wheel Lug Nut Torque
Specifications in this chapter for
the proper lug nut torque
specification.
8-lug nut torque sequence
10-lug nut torque sequence
19. Stow the flat tire. See Stowing the flat or spare tire if the vehicle is
equipped with a spare tire carrier.
20. Stow the jack, jack handle and lug wrench. Make sure the jack is
securely fastened so it does not rattle when driving.
21. Unblock the wheels.
The following step applies to F-250 and F-350 Single Rear Wheel vehicles
only:
22. When installing the wheel center
ornaments, ensure that the ornament
retention towers on the back side of
the ornament are aligned with the
studs or lug nuts. The retention
towers are designed to be installed
over the studs or nuts and retain to
the flange on the lug nut.
1
3 4
2
7 6
5 8
1
2
3
4
5 6
7
8
9
10
Wheels and Tires 383
2013 F-250/350/450/550 (f23)
Owners Guide gf, 3rd Printing, December 2012
USA (fus)