NISSAN 2013 Armada - Owner's Manual - Manual (Page 210)

HOW TO USE THE NISSAN
CONTROLLER
Use the NISSAN controller to choose an item on
the display screen. Highlight an item on the dis-
play using the main directional buttons
᭺
2 (cer-
tain Navigation System functions use the addi-
tional directional buttons
᭺
6 ) or the center dial
᭺
3 . Then press the ENTER button
᭺
1 to select
the item or perform the action.
The BACK button
᭺
4 has two functions:
● Go back to the previous display (cancel).
If you press the BACK button
᭺
4 during setup,
the setup will be canceled and/or the display will
return to the previous screen.
● Finish setup.
In some screens, pressing the BACK button
᭺
4
accepts the changes made during setup.
For the VOICE button
᭺
5 functions, refer to the
separate Navigation System Owner’s Manual.
HOW TO USE THE TOUCH
SCREEN
CAUTION
● The glass display screen may break if it
is hit with a hard or sharp object. If the
glass screen breaks, do not touch it.
Doing so could result in an injury.
● To clean the display, never use a rough
cloth, alcohol, benzine, thinner or any
kind of solvent or paper towel with a
chemical cleaning agent. They will
scratch or deteriorate the panel.
● Do not splash any liquid such as water
or car fragrance on the display. Contact
with liquid will cause the system to
malfunction.
To help ensure safe driving, some functions can-
not be operated while driving.
The on-screen functions that are not available
while driving will be “grayed out” or muted.
Park the vehicle in a safe location and then oper-
ate the navigation system.
WARNING
● ALWAYS give your full attention to
driving.
● Avoid using vehicle features that could
distract you. If distracted, you could
lose control of your vehicle and cause
an accident.
LHA0882
Monitor, climate, audio, phone and voice recognition systems 4-17