NISSAN 2013 Armada - Owner's Manual User Manual
Page 29
Advertising
![background image](/manuals/602649/29/background.png)
Components
1. Head restraint
2. Lock knob
3. Stalks
Removal
Use the following procedure to remove the head
restraints.
1. Adjust the seat or seatback as necessary.
2. Push and hold the lock knob(s).
3. Pull the head restraint up until it is removed
from the seat.
4. Store the head restraint properly so it is not
loose in the vehicle.
5. Reinstall the head restraint and properly ad-
just the seat or seatback before an occupant
uses the seating position.
Install
1. Align the head restraint stalks with the holes
in the seat. Make sure the head restraint is
facing the correct direction.
2. Push the head restraint down until it locks in
place.
LRS2073
LRS2074
LRS2075
1-12
Safety—Seats, seat belts and supplemental restraint system
Advertising