Windshield wiper blades -20, Cleaning -20 replacing -20 – NISSAN 2013 Armada - Owner's Manual User Manual

Page 419

Advertising
background image

NOTE:

The filters are marked with air flow arrows.
The end of the filter with the arrow should
face the rear of the vehicle. The arrows
should face downward.

4. Insert the first filter into the housing and slide

it over to the right. Insert the second filter
into the housing.

5. Replace the filter cover.

6. Install the glove box assembly.

7. Fill out the date information on the small

replacement label and attach it to the glove
box lid.

CLEANING

If your windshield is not clear after using the
windshield washer or if a wiper blade chatters
when running, wax or other material may be on
the blade or windshield.

Clean the outside of the windshield with a washer
solution or a mild detergent. Your windshield is
clean if beads do not form when rinsing with clear
water.

Clean each blade by wiping it with a cloth soaked
in a washer solution or a mild detergent. Then
rinse the blades with clear water. If your wind-
shield is still not clear after cleaning the blades
and using the wiper, replace the blades.

CAUTION

Worn windshield wiper blades can dam-
age the windshield and impair driver
vision.

REPLACING

Replace the wiper blades if they are worn.

1. Lift the wiper arm away from the windshield.

2

Push the release tab, then move the wiper
blade down the wiper arm to remove.

3

Remove the wiper blade.

4. Insert the new wiper blade onto the wiper

arm until it clicks into place.

5. Rotate the wiper blade so the dimple is in the

groove.

LDI0404

WDI0408

WINDSHIELD WIPER BLADES

8-20

Maintenance and do-it-yourself

Advertising