Fm-am-sat radio with compact disc (cd) player, Audio main operation, Fm-am-sat radio operation – NISSAN 2012 GT R - Multi Function Display Owner's Manual User Manual

Page 136: Fm-am-sat radio with compact disc (cd) player -12

Advertising
background image

Black plate (136,1)

R35-N EDITED: 2010/ 12/ 2

3-12

Audio system

FM-AM-SAT RADIO WITH COM-
PACT DISC (CD) PLAYER

The satellite radio mode requires an active XM
Satellite Radio subscription. The satellite radio is
not available in Alaska, Hawaii and Guam.

It may take some time to receive the activation
signal after subscribing the XM Satellite Radio.
After receiving the activation signal, an available
channel list will be automatically updated in the
radio. For XM, push the ignition switch from
LOCK to ACC to update the channel list.

Audio main operation

Head unit:

The auto loudness circuit enhances the low and
high frequency ranges automatically in both
radio reception and CD playback.

ON·OFF/Volume control:

Push the ignition switch to the ACC or ON
position, and then push the ON·OFF button
while the system is off to turn on the last audio
source (i.e. FM or CD), which was playing
immediately before the system was turned off.
While the system is on, pushing the ON·OFF
button turns the system off.

Turn the VOL control knob to adjust the volume.

Adjusting tone quality and speaker bal-
ance:

To adjust Bass, Treble, Balance and Fade, push
the Audio control knob. When the display shows
the setting you want to change (Bass, Treble,
Balance and Fade), rotate the Audio control
knob to set the desired setting.

“Audio settings” (page 7-3)

Switching the display:

Pushing <DISC·AUX> will switch the displays
as follows:

iPod

®

/USB

? CD/DVD ? Music Box ?

Bluetooth

®

streaming audio (if so equipped)

?

AUX (if so equipped)

? iPod

®

/USB

FM-AM-SAT radio operation

FM/AM radio band select:

Pushing <FM·AM> will change the band as
follows:

AM

? FM1 ? FM2 ? AM

XM satellite radio band select:

Pushing <SAT> will change the band as
follows:

XM1

? XM2 ? XM3 ? XM1

When <FM·AM> or <SAT> is pushed while
the ignition switch is in the ACC or ON position,
the radio will come on at the channel last played.

The last channel played will also come on when
the ON·OFF button is pushed to ON.

The satellite radio is not available in Alaska,
Hawaii and Guam.

If another audio source is playing when
<FM·AM> or <SAT> is turned to ON, the
audio source will automatically be turned off and
the last radio channel played will come on.

When the stereo broadcast signal is weak, the
radio will automatically change from stereo to
monaural reception.

TUNE (Tuning):
. For AM and FM radio

Turn the radio TUNE knob for manual tuning.

Advertising