NISSAN 2012 GT R - Multi Function Display Owner's Manual - Manual (Page 255)

Black plate (255,1)
R35-N EDITED: 2010/ 12/ 2
INFO:
. The displayed clock time is set by the GPS
system.
. The clock time may not be displayed on the
screen when the system is not receiving a
GPS signal, even when the system is set to
display the time.
. You can choose to display the clock in the
12-hour/24-hour format.
“Clock settings” (page 7-7)
ACCELERATION SCREEN
The acceleration screen displays the results of
how the vehicle behaves based on the manner in
which you operate the vehicle. The information
displayed is for confirmation purposes. The
results of how you use the accelerator pedal
can be displayed as an acceleration g-force
timeline. You can use this information to improve
your operation of the accelerator pedal.
WARNING
. Use the information from the multi
function meter strictly as a refer-
ence to make your driving more
comfortable. The readings are not
meant to prevent accidents caused
by reckless driving or poor driving
conditions (due to weather, road
condition, etc.). Always obey all
traffic regulations and posted speed
limits.
. Red zone readings are configured to
function only as a guide for smooth
driving. The readings are not in-
tended to prevent accidents caused
by reckless driving.
How to view screen
&
1 ACCEL G (timeline graph):
Displays the acceleration exerted on the vehicle.
The vertical readout illustrates the progress of
acceleration and the horizontal readout tracks the
acceleration timeline of the past 20 seconds.
&
2 Red zone display:
The color of the graph will change when the
vehicle accelerates beyond a preset level of g-
force.
&
3 G-meter:
Displays the g-force currently being exerted on
the vehicle.
&
41 BOOST:
Displays the engine charger pressure.
&
5 ACCEL PEDAL:
Displays the accelerator pedal position.
Multi function meter 9-17
DRIVING SUPPORT SCREEN