NISSAN 2012 GT R - Multi Function Display Owner's Manual - Manual (Page 263)

Black plate (263,1)
R35-N EDITED: 2010/ 12/ 2
This allows you to measure/display the timeline
and waypoint history over a given time.
STOPWATCH SCREEN
With the STOP WATCH screen you can
measure a segment of time or passing time.
You can also display and save recorded time-
lines and data.
How to view screen
&
1 TIME LOG:
Prominently displays the current time being
measured. The measured times are displayed in
a list. The system can store up to 99 items in its
memory.
&
2 Timer-on indicator:
The timer-on indicator will flash when the stop-
watch function is active.
&
3 SPEED:
Displays the vehicle speed while driving.
&
4 ELAPSED TIME:
Displays the total elapsed time measured since
the stopwatch function was started.
Measuring timed distance
To measure the timed distance, use <START/
STOP> or <MRK> on the steering switch.
1. With the STOP WATCH screen displayed,
push <START/STOP>. The timer-on in-
dicator will flash when the stopwatch func-
tion is active.
2. Each time you push <MRK> the displayed
time will be recorded into the system and
will be viewable in the list.
3. Push <START/STOP>. The stopwatch
function will stop timing.
Multi function meter 9-25
DRIVING RECORD SCREEN