NISSAN 2012 GT R - Multi Function Display Owner's Manual - Manual (Page 247)

Black plate (247,1)
R35-N EDITED: 2010/ 12/ 2
No. Item Large panel Small panel
13 Brake pedal — *
14 Steering — *
15 Cornering g-force * *
16 Accel/Braking g-force * *
17 Total g-force * *
18 Clock — *
19 Reset the CUSTOM VIEW #(1-4) to Default * *
INFO:
. Each panel selected will be saved
. Panels will remain saved in the system even
after the engine is turned off.
. Two of the same panels cannot be displayed
at the same time.
. Two of the same panels of different sizes
cannot be displayed at the same time.
. Panels that have not been assigned a
display item remain empty.
Initializing display
The modified display will return to the screen
that was first configured.
1. Display the screen you would like to initialize
and push <ENTER>.
2. Select the panel and push <ENTER>.
3. Highlight [Reset the CUSTOM VIEW 1 to
Default] and push <ENTER>.
INFO:
When operating the touch panel to initialize the
display, the same procedure used to select a
meter is performed.
“Select using touch panel” (page 9-8)
PERFORMANCE AND VEHICLE IN-
FORMATION PANEL
The appearance of each panel varies. The way
that large panels and small panels are displayed
also differs, even when the same mechanical
information is displayed.
Multi function meter 9-9