NISSAN 2012 GT R - Multi Function Display Owner's Manual User Manual

Page 137

Advertising
background image

Black plate (137,1)

R35-N EDITED: 2010/ 12/ 2

. For XM Satellite Radio

Turn the radio TUNE knob to seek channels
from all of the categories when any category
is not selected.

SEEK tuning/CATEGORY (CAT):
. For AM and FM radio

Push <

> or <

> to tune from low to

high or high to low frequencies and to stop
at the next broadcasting station.

. For XM Satellite Radio

Push <

> or <

> to tune to the first

channel of the next or previous category.

During satellite radio reception, the following
notices will be displayed under certain condi-
tions.
. NO SIGNAL (No signal is received while the

SAT tuner is connected.)

. OFF AIR (Broadcasting signed off)
. CHECK ANTENNA (Antenna connection

error)

. LOADING (When the initial setting is

performed)

. UPDATING (When the satellite radio sub-

scription is not active)

SCAN tuning:

Push <SCAN> to tune from low to high

frequencies and stop at each broadcasting
station/channel for 5 seconds. Pushing the
button again during this 5 seconds period will
stop SCAN tuning and the radio will remain
tuned to that station/channel.

If <SCAN> is not pushed within 5 seconds,
SCAN tuning moves to the next station/channel.

*

1

to

*

6

Station memory operations:

12 stations/channels can be set for the FM band
(6 each for FM1 and FM2), 18 for XM radio (6
each for XM1, XM2 and XM3) and 6 stations
can be set for the AM band.

1. Choose the radio band using the radio band

select button.

2. Tune to the desired station/channel using

<

>, <

>, <SCAN> or the radio

TUNE knob.

3. Push and hold the desired station preset

button

*

1

to

*

6

until the radio mutes.

4. The station indicator will then come on and

the sound will resume. Memorizing is now
complete.

5. Other buttons can be set in the same

manner.

If the battery cable is disconnected, or if the fuse
opens, the radio memory will be erased. In that
case, reset the desired stations/channels.

List (AM and FM radio):

When [List] on the display is selected while the
FM or AM radio is being played, the preset
station list will be displayed.

If 1 of the 6 preset stations listed is touched and
held, the current station will be stored as the
new preset.

Menu (XM Satellite Radio):

When [Menu] on the display is selected while
the XM Satellite Radio is being played, the menu
list will be displayed.

The following items are available.
. Preset List

Displays the preset channel list. If 1 of the 6
preset stations listed is touched and held,
the current station will be stored as the new
preset.

. Customize Channel List

Selects specific channels to skip while using
the TUNE, SEEK/CATEGORY or Menu-
Categories feature.

. Favorite Artists & Songs

Stores the current artist or song that is being
played. Touch [Alert] to be reminded when
the stored artist or song is playing on a
station while listening to XM.

Audio system

3-13

Advertising