NISSAN 2015 JUKE - Owner's Manual - Manual (Page 195)

4-44 Heater, air conditioner, audio and phone systems
FM-AM Radio operation
radio (FM·AM) band select:
Push the button to change the band as
follows:
AM
? FM1 ? FM2? AM
TUNE (Tuning):
Turn the TUNE·FOLDER knob for manual tuning.
SEEK tuning:
Push the or button to tune from low to
high or high to low frequencies and to stop at
the next broadcasting station.
SCAN tuning:
Push the button to tune from low to high
frequencies and stop at each broadcasting
station for several seconds. Pushing the button
again during this several seconds period will
stop SCAN tuning and the radio will remain
tuned to that station.
If the button is not pushed within this
period, SCAN tuning moves to the next station.
to Radio memory buttons:
Up to 12 stations can be set for the FM band (6
each for FM1 and FM2) and 6 stations can be
set for the AM band.
1. Choose the radio band using the
button.
2. Tune to the desired station.
3. Push and hold the desired station preset
button to until beep sounds.
4. The station indicator will then come on. The
station is now set to the button memory.
5. Other buttons can be set in the same
manner.
If the battery cable is disconnected, or if the fuse
opens, the station memory will be erased. In that
case, reset the desired stations.
CD player operation
Place the ignition switch in the ON or ACC
position. Insert the Compact Disc (CD) into the
slot with the label side facing up. The CD will be
guided automatically into the slot and start
playing.
After loading the CD, the number of tracks on
the CD and the play time will appear on the
display.
If another audio source is already operating, it
will automatically turn off and the CD will play.
If the system has been turned off while the CD
was playing, pushing the Power button will start
the CD.
CD PLAY:
When the CD button is pushed while a CD is
loaded, the CD will start playing.
SEEK TRACK:
When the or button is pushed and hold
while the CD is being played, the CD will play
while fast forwarding or rewinding. When the
button is released, the CD will return to normal
play speed.
When the or button is pushed while
the CD is being played, the next track or the
beginning of the current track on the CD will be
played.
REPEAT (RPT):
When the RPT button is pushed while the CD is
played, the play pattern can be changed as
follows:
(CD)
(Normal) ⇔ 1 Track Repeat
(CD with compressed audio files)
(Normal) ? 1 Folder Repeat ? 1 Track Repeat
? (Normal)
RANDOM (RDM):
When the RDM button is pushed while a CD is