NISSAN 2013 LEAF - Owner's Manual - Manual (Page 355)

HEADLIGHTS
Replacing
Halogen headlight (high-beam):
The headlight high-beam is a semi-sealed beam
type that uses a replaceable headlight (halogen)
bulb.
CAUTION
• Do not leave the bulb out of the head-
light reflector for a long period of time.
Dust, moisture, smoke, etc. entering
the headlight body may affect bulb
performance.
• High-pressure halogen gas is sealed
inside the halogen bulb. The bulb may
break
if the glass envelope is
scratched or the bulb is dropped.
• Only touch the base when handling the
bulb. Never touch the glass envelope.
Touching the glass envelope could sig-
nificantly affect bulb life and/or head-
light performance.
• Aiming is not necessary after replac-
ing the bulb. When aiming adjustment
is necessary, contact a NISSAN certi-
fied LEAF dealer.
Use the same number and wattage as originally
installed as shown in the chart.
Disconnect the battery negative cable before
replacing bulbs.
1. Remove the connector
᭺
1 .
2. Turn the headlight bulb, and then remove the
bulb
᭺
2 .
Disconnect the battery negative cable before
replacing bulbs.
1. Remove the connector
᭺
1 .
2. Turn the headlight bulb, and then remove the
bulb
᭺
2 .
Type A
Type B
8-22 Maintenance and do-it yourself