NISSAN 2011 Murano - Owner's Manual - Manual (Page 236)

Black plate (236,1)
[ Edit: 2011/ 7/ 12 Model: Z51-X ]
4-32 Monitor, heater, air conditioner, audio, phone and voice recognition systems
SAA2834
Type B
1. “AUTO” automatic air conditioner ON button/
Temperature control dial (driver side)
2. “A/C” air conditioner ON/OFF button
3. “ ” intake air control button
4. “ ” fan speed control dial/ON/OFF button
5. “ ” upper vent system button
6. “DUAL” zone control ON/OFF button/Tempera-
ture control dial (passenger side)
7. “ ” front defroster button
8. “ ” rear window defroster button (See “Rear
window and outside mirror defroster switch” in
the “2. Instruments and controls” section.)
9. “MODE” manual air flow control button
AUTOMATIC OPERATION
Cooling and/or dehumidified heating
(AUTO)
This mode may be used all year round. The
system works automatically to control the inside
temperature, air flow distribution and fan speed
after the preferred temperature is set manually.
1. Push the “AUTO” button on. (The indicator
on the button will illuminate and AUTO will
be displayed.)
2. Operate the driver side temperature control
buttons (type A) or dial (type B) to set the
desired temperature.
Adjust the temperature to about 758F
(248C) for normal operation.
. The temperature of the passenger com-
partment will be maintained automati-
cally. Air flow distribution and fan speed
will also be controlled automatically.
3. You can individually set driver and front
passenger side temperature using each
temperature control buttons (type A) or dial
(type B). When the “DUAL” button is pushed
or the passenger side temperature control
buttons (type A) or dial (type B) is/are
operated, the DUAL indicator will come on.
To turn off the passenger side temperature
control, push the “DUAL” button.
A visible mist may be seen coming from the
ventilators in hot, humid conditions as the air is
cooled rapidly. This does not indicate a mal-
function.
Heating (A/C OFF)
The air conditioner does not activate in this
mode. When you need to heat only, use this
mode.
1. Push the “A/C” button. (The A/C indicator
will turn off.)
2. Operate the temperature control buttons
(type A) or dial (type B) to set the desired
temperature.