NISSAN 2011 Murano - Owner's Manual - Manual (Page 454)

Black plate (454,1)
[ Edit: 2011/ 7/ 12 Model: Z51-X ]
9-12 Technical and consumer information
STI0821
Use the following steps to mount the license
plate:
Before mounting the license plate, confirm that
the following parts are enclosed in the plastic
bag.
. License plate bracket
. Screw 6 2
1. Park the vehicle on flat, level ground.
2. Line up the tabs *
B on the license plate
bracket under the top of the front bumper
*
A . Hold the license plate bracket in place.
3. Install the license plate bracket with screws.
4. Install the license plate with screws (sold
separately).
Use a screw of 1/4 inch (6mm) in diameter and
approximately 3/4 inch (20mm) in length.
INSTALLING FRONT LICENSE PLATE