NISSAN 2011 Murano - Owner's Manual User Manual
Page 26
Black plate (26,1)
[ Edit: 2011/ 7/ 12 Model: Z51-X ]
1-4
Safety — Seats, seat belts and supplemental restraint system
SSS0793
Seat lifter (if so equipped):
Pull up or push down the adjusting lever to
adjust the seat height until the desired position
is achieved.
SSS0684
Lumbar support (if so equipped):
The lumbar support feature provides lower back
support to the driver.
Move the lever
*
1
up or down to adjust the
seatback lumbar area.
Power seat adjustment
Operating tips:
.
The power seat motor has an auto-reset
overload protection circuit. If the motor
stops during operation, wait 30 seconds,
then reactivate the switch.
.
Do not operate the power seat switch for a
long period of time when the engine is off.
This will discharge the battery.
See “Automatic drive positioner” in the “3. Pre-
driving checks and adjustments” section for the
seat position memory function.