Warning signals -20 troubleshooting guide -20 – NISSAN 2014 Rogue - Owner's Manual User Manual

Page 167

Advertising
background image

Answer back horn feature

If desired, the answer back horn feature can be
deactivated using the Intelligent Key. When de-
activated and the LOCK

button is

pushed the hazard indicator flashes twice and
when the UNLOCK

button is pushed, nei-

ther the hazard indicator nor the horn operates.

NOTE:

If you change the answer back horn and
light flash feature with the Intelligent Key,
the vehicle information display screen will
show the current mode after the ignition
switch has been cycled from the OFF to the
ON position. The vehicle information dis-
play screen can also be used to change the
answer back horn mode. For additional in-
formation, refer to “Answer back horn” in
the “Instruments and controls” section.

To deactivate: Press and hold the
and

buttons for at least 2 seconds.

The hazard warning lights will flash 3 times to
confirm that the answer back horn feature has
been deactivated.

To activate: Press and hold the
and

buttons for at least 2 seconds once

more.

The hazard warning lights will flash once and the
horn will sound once to confirm that the horn
beep feature has been reactivated.

Deactivating the horn beep feature does not si-
lence the horn if the alarm is triggered.

WARNING SIGNALS

To help prevent the vehicle from moving unex-
pectedly by erroneous operation of the Intelligent
Key or to help prevent the vehicle from being
stolen, a chime or buzzer sounds from inside and
outside the vehicle and a warning is displayed in
the instrument panel.

When a chime or beep sounds or a warning is
displayed, be sure to check the vehicle and the
Intelligent Key.

See the “Troubleshooting guide” in this section
and “Vehicle information display” in the “Instru-
ments and controls” section of this manual.

TROUBLESHOOTING GUIDE

Verify the location of all Intelligent Keys that are
programmed for the vehicle. If another Intelligent
Key is in range or inside the vehicle, the vehicle
system may respond differently than expected.

WPD0362

3-20

Pre-driving checks and adjustments

Advertising