NISSAN 2014 Rogue - Owner's Manual - Manual (Page 378)

4. Push the release tab
᭺
4 .
5. Move the wiper blade down
᭺
5 and remove.
6. Insert the new wiper blade onto the wiper
arm until it clicks into place.
7. Rotate the wiper blade so the dimple is in the
groove.
8. Finally, push the windshield wiper and
washer lever to the mist position
᭺
8 . This
action will cause the wipers to resume the
set position.
CAUTION
● After wiper blade replacement, return
the wiper arm to its original position;
otherwise it may be damaged when the
hood is opened.
● Make sure the wiper blades contact the
glass; otherwise the arms may be dam-
aged from wind pressure.
LDI2194 LDI2355
Maintenance and do-it-yourself 8-19