How to use remote keyless entry system -7 – NISSAN 2015 Xterra - Owner's Manual User Manual

Page 142

Advertising
background image

HOW TO USE REMOTE KEYLESS
ENTRY SYSTEM

Locking doors

1. Close all windows.

2. Remove the key from the ignition switch.

3. Close the hood and all doors.

4. Press the

button on the keyfob. All

the doors lock. The hazard warning lights
flash twice and the horn beeps once to
indicate all doors are locked.

● When the

button is pressed with

all doors locked, the hazard warning lights
flash twice and the horn beeps once as a
reminder that the doors are already
locked.

● If a door is open and you press

the

button, the doors will lock

but the horn will not beep and the hazard
lights will not flash.

The horn may or may not beep. For additional
information, refer to “Silencing the horn beep
feature” in this section.

Unlocking doors

Press the

button on the keyfob once.

● Only the driver’s door unlocks.
● The hazard warning lights flash once if all

doors are completely closed with the ignition
switch in any position except the ON posi-
tion.

● The interior lights illuminate for a period of

time when the interior light switch is in the
normal operation position.

Press the

button on the keyfob again

within 5 seconds.

LPD0209

LPD0210

Pre-driving checks and adjustments

3-7

Advertising