NISSAN 2015 Xterra - Owner's Manual - Manual (Page 24)

A. Straps
Folding the rear bench seat
To fold the rear bench seat flat for maximum
cargo hauling:
1. Disconnect and secure the center seat belt
and tongues into the retractor base. For
additional information, refer to “Stowing the
center seat belt” in this section. Then prop-
erly stow the outboard seat belts in the seat
belt hooks before folding down the rear
seats. For additional information, refer to
“Seat belt hook” in this section.
The head restraint/headrest must be re-
moved before folding down the seatbacks.
To remove the head restraint/headrest, push
and hold the lock knob while moving the
head restraint/headrest in an upward direc-
tion. Store the head restraint/headrest prop-
erly so it is not loose in the vehicle.
Pull the strap forward, located in the center
of each seat cushion, and fold each seat
cushion toward the front of the vehicle.
᭺
2 Then pull the straps located on the outside
edge of each seatback to fold the seatbacks
forward.
LRS2490 LRS2549
Safety—Seats, seat belts and supplemental restraint system 1-5