Control buttons -77 – NISSAN 2015 Xterra - Owner's Manual User Manual

Page 228

Advertising
background image

Voice Prompt Interrupt

While using the Voice Recognition system, the
system voice can be interrupted to allow the user
to speak commands. While the system is speak-
ing, press the

button on the steering

wheel. The system voice will stop and a tone will
be heard. After the tone, speak desired command
(displayed on the touch-screen).

One Shot Call

To use the system faster, you may speak the
second level commands with the main menu
command on the main menu. For example, press
the

button and after the tone say, “Call

Redial”.

CONTROL BUTTONS

The control buttons for the Bluetooth® Hands-
Free Phone System are located on the steering
wheel.

PHONE/SEND

Press the

button to initiate

a VR session or answer an incom-
ing call.

You can also use the

button

to interrupt the system feedback
and give a command at once. For
additional information, refer to
“Voice commands” and “During a
call” in this section.

PHONE/END
While the Voice Recognition sys-
tem is active, press and hold
the

button for 5 seconds to

quit the Voice Recognition system
at any time.

ENTER button / tuning switch
While using the Voice Recogni-
tion system, tilt the tuning switch
up or down to manually control
the phone system. Press the EN-
TER button to select an option on
the display screen.

LHA2561

Monitor, climate, audio, phone and voice recognition systems

4-77

Advertising