Operating tips -14 – NISSAN 2015 Xterra - Owner's Manual User Manual

Page 165

Advertising
background image

For vehicles with Navigation System

1. Firmly apply the brake and place the shift

lever in R (reverse)

2. Press the

button on the control panel.

3. The screen will display the Night settings.

4. Turn the TUNE/SCROLL knob to adjust the

setting up or down.

5. Press the

button again to access the

Auto settings.

6. Turn the TUNE/SCROLL knob to adjust the

setting up or down.

● Do not adjust the display settings of the

RearView Monitor while the vehicle is mov-
ing.

OPERATING TIPS

CAUTION

Do not use alcohol, benzine or thinner

to clean the camera. This will cause
discoloration. To clean the camera,
wipe with a cloth dampened with a di-
luted mild cleaning agent and then wipe
with a dry cloth.

Do not damage the camera as the moni-

tor screen may be adversely affected.

● When the shift lever is shifted to R (Re-

verse), the monitor screen automatically
changes to the RearView Monitor mode.
However, the radio can be heard.

● It may take some time until the RearView

Monitor is displayed after the shift lever has
been shifted to R (Reverse). Objects may be
distorted momentarily until the RearView
Monitor screen is displayed completely.
When the shift lever is returned to a position
other than R (Reverse), it may take some
time until the screen changes. Objects on
the screen may be distorted until they are
completely displayed.

● When the temperature is extremely high or

low, the screen may not clearly display ob-
jects. This is not a malfunction.

● When strong light directly enters the cam-

era, objects may not be displayed clearly.

● Vertical lines may be seen in objects on the

screen. This is due to strong reflected light
from the bumper. This is not a malfunction.

● The screen may flicker under fluorescent

light. This is not a malfunction.

● The colors of objects on the RearView Moni-

tor may differ somewhat from those of the
actual object.

● When the contrast of objects is low at night,

pressing the ENTER/AUDIO button may not
change the brightness.

● Objects on the monitor may not be clear in a

dark place or at night.

● If dirt, rain or snow attaches to the camera,

the RearView Monitor may not display ob-
jects. Clean the camera.

● Do not use body wax on the camera window.

If body wax does get on the camera window,
wipe off the wax with a clean cloth damp-
ened with mild detergent diluted with water.

4-14

Monitor, climate, audio, phone and voice recognition systems

Advertising