Jeppesen FliteDeck Pro (iOS) - Manual (Page 24)

Setting Up Your Flight
Create a New Flight
October 2014 Jeppesen FliteDeck Pro User Guide
Copyright © 2014 Jeppesen. All rights reserved.
17
Add SIDs and STARs
After you enter origin and destination airports, you can enter a
SID or a STAR (or both) in the route description.
To render SID or STAR transition points on the enroute map use
this format:
• For a SID, enter: rwy.SID.transition
• For a STAR, enter: transition.STAR.rwy
For example, to enter the LBSTA Three RNAV departure out of
KBOS, departing on Runway 22L, via the LBSTA enroute
transition, you would enter: 22L.LBSTA3.LBSTA
When the runway is a part of the route description, transition
points are depicted on the enroute map by a dashed line and a
label that identifies the procedure appears along the dashed line.
In addition, Jeppesen FliteDeck Pro adjusts the flight distance
that appears in the Flight Info drawer.
NOTE The depiction of SID and STAR transition points on the
enroute map is provided to support situational awareness only.
Always brief the SID or STAR terminal procedure.